EVADEST®
 
Zero Liquid Discharge Vacuum Evaporator

Wastewater Treatment Vacuum Evaporator Zero Liquid Discharge  Zld Water Treatment Evaporator MVR yasa Et Evadest
 

EVADEST Wastewater Vacuum Evaporator Introduction

YASA ET EVADEST Zero Liquid Discharge Evaporator series is built on diversified boiling points of different solutions and combined with advanced energy saving technology, helps the factory to achieve Zero Liquid Discharge for their wastewater.

YASA ET's product designs, manufacturing and quality standards take into account the existing wastewater applications on-site. Our project managers focus on each project specific conditions, and are readily available to offer support during and after the EVADEST evaporator installation process.

Our experienced technical team is prepared to implement the appropriate system for your wastewater treatment applications, while ensuring a long life cycle and best value of ownership for our EVADEST evaporators series.

Finally, our technical team offers full support for maintenance and cleaning procedures of the evaporator and wastewater tanks.

EVADEST-E

Based on the heat pump principle, the evaporator works at -96kPa in a vacuum environment with a temperature of 37~40°C. The equipment has excellent COD removal efficiency, thus high-quality distilled water can be obtained from difficult to treat wastewaters.

Capacity: 1000~4000 l/24h

Energy consumption: 0.15~0.19 kwh/l

Layout: Custom

EVADEST-M

Based on the technology of MVR (Mechanical Vapor Recompression), the evaporator can greatly reduce the energy consumption and reaches higher processing capacity of tons of wastewater.

 

 

Capacity: 6000~20000 l/24h

Energy consumption: 0.05~0.07 kwh/l

Layout: Custom

EVADEST-S

By adopting Evaporative-Crystallization integrated technology, the wastewater directly enters the crystallizer after being concentrated, realizing one-step transformation from sewage to sludge, further reducing the energy consumption of the wastewater treatment process.

Capacity: 6000~20000 l/24h

Energy consumption: 0.79~1.07 kwh/l

Layout: Custom

 

How Our Wastewater Evaporator Works

 

A wastewater evaporator uses thermodynamics and mass transfer to remove water from waste and pollutants. The thermodynamic wastewater evaporation of EVADEST involves heating the waste material sufficiently to turn water into a vapor, thus removing it from pollutants.

The wastewater is fed into the evaporator and passes across a heat source. The applied heat converts the water in the solution into vapor. The vapor is removed from the rest of the solution and is condensed while the now-concentrated solution is removed.

 

EVADEST wastewater evaporator consists of four sections. The heating section contains the heating medium and steam is fed into it. The parallel tubes design is proven optimal in heating distribution and efficiency.

 

The concentrating and separating section removes the vapor being produced from the solution. Finally, the condenser condenses the separated vapor, then the vacuum pump provides pressure to increase circulation.

EVADEST wastewater evaporation has become an effective method for removing contaminants and concentrating liquid waste. It can remove salts, heavy metals, and hazardous materials, reducing COD, BOD and SS very effectively.

 

YASA ET wastewater evaporators have been found to be more efficient than other treatment systems since their energy consumption is lower and simple functioning for treating large quantities of wastewaters.

Wastewater Treatment Mvr vacuum Evaporator Zero Liquid Discharge  Zld Water Treatment Machinery Yasa Et Evadest - Buy Low Cost Kuwait Wastewater Treatment Mvr Evaporator Zero Liquid Discharge Zld Water Treatment YASA ET
 
 

YASA ET EVADEST Vacuum Evaporator

Vacuum evaporators have proven to be one of the best solutions for the treatment and reuse of wastewater in most of industrial applications.

YASA ET deliver constant innovations in the wastewater treatment field. We customize every evaporator to provide more efficiency and durability to our customers than any other wastewater equipment manufacturer.

EVADEST wastewater evaporators are the best technology for implementing a Zero Liquid Discharge system, where wastewater is transformed into two streams, one containing solid waste with reusable resources (mainly raw materials and by-products) and another one with high quality water, which can be reused.

 

Our EVADEST evaporators allows our clients to:

  • Reduce wastewater output by 97%, making it possible to reuse the water in the production line;

  • Minimize the final sludge and concentrate;

  • Minimize disposal costs and repay the initial investment in less than one year.

EVADEST evaporator series feature simple operation, occupy little space and are a clean and safe technology. In addition, all equipment is highly automated, requiring minimal supervision.

DO YOU NEED HELP WITH YOUR WASTEWATER?

YASA ET supplies treatment systems for a wide range of industries. 

 

Get in touch with our team for a free consultation about our EVADEST Vacuum Evaporator.